Imagine, while restarting or turning on your PC, suddenly you experience a Blue of Death screen containing a message, Readyboot stopped due to 0xc0000188 error. This problem was first experienced by Windows 7 users and now it’s common in all versions of windows. Generally, you can see this problem when you start your pc or during restarting time.

It may cause a slow boot time when you turn on your PC. On the other hand, the operation of the device won’t be affected because it is just related to boosting the boot time of a computer. There is nothing to worry about this, by following some easy steps, this issue can be solved in a minute. So, without any further discussion let’s see the steps to solve this issue.

What Is ReadyBoot and Why Does The Error Happen?

Readyboot is a feature of Microsoft Windows which is implemented in Windows to boost the performance without embedding additional RAM. It boosts up the boot time of the computer. It is suggested according to users, that the maximum size should be set to 256 MB but not more than that. However, storage of 128 MB is inch perfect for avoiding any circumstances.

“ReadyBoot Stopped” or “Kernel Event Tracing- Error 3” this issue occurred when the allocated storage size is less than the required one. Default size of 20 MB is allocated for ReadyBoot, and when the file size exceeded more than the allocated storage, an error arises.

Key Steps To Solve Session ReadyBoot Stopped Due To The Following Error 0xc0000188

The one and only solution is to increase the allocated size of Readyboot. There are some easy steps by which you can fix this.

Step 1: Go to the search option manually or press Windows + S and type Performance Monitor.

Step 2: Open Performance Monitor and expand Data Collector Sets.

Step 3: After expanding, click on Startup Event Trace Sessions and look for ReadyBoot on the right side of the screen. Double click on ReadyBoot

Step 4: Select Stop Condition and set the allocated size to 128 to 256. At the bottom of near the screen, the option of increasing the can be found.

Step 5: Then apply the changes and click ok.

Now exit and restart the PC. If you want to check if the issue is solved or not then open the Run dialog box by pressing Windows + R then type “eventvwr.msc” and press enter.

Frequently Asked Questions

What Prefetch folder actually is?

Prefetch is known as a file that is used to help windows load faster. Readyboot system, a feature of Microsoft windows that traces boot time history and analyze boot time. It helps to speed up the booting time by tracing previous boot history and the programs while starting your computer. Windows save this information in a form of small files. These files are kept in the Prefetch folder.

Can the Prefetch files be deleted?

Yes, you can delete the files. But it is suggested to do not to delete them as it helps windows to speed up the boot time. Prefetch files take a little space and it won’t bother you unless you are running out of space and then you can delete them to regenerate the space.

Will there be any issue if ReadyBoot is disabled?

No, there will be no issue if you disable the ReadyBoot feature. It just helps to speed up the boot time and nothing else. If you want to disable it:

Step 1: Go to the search option manually or press Windows + S and type Performance Monitor.

Step 2: Open Performance Monitor and expand Data Collector Sets.

Step 3: After expanding, click on Startup Event Trace Sessions and look for ReadyBoot on the right side of the screen and disable it.

Conclusion

Without adding extra RAM, you can speed up the boot time just by using this feature of windows. When this feature crosses the allocated size then it stopped and the error arises. You can follow the mentioned steps by which you can solve this issue in a minute. After following the steps, if there arrive any questions or you face any issues then feel free to comment below.